Aviation Digital Trend In The Next Three Years

| March 6, 2019

article image
Global local mobile coverage. With local radio access via 600 mobile network operators. Plus regional distribution of traffic to off¬er a near-to-local experience Secure access to own private network. With a fully secured end-to-end global private network. Controlled, secure routing of traffic with custom APNs

Spotlight

Omega Airline

Omega Airline Software is the developer of Ames, a enterprise software suite dedicated to planning and scheduling the maintenance of commercial aircraft.

OTHER ARTICLES

American Airlines Eyes Direct Doha Flights – What To Expect

Article | February 25, 2020

On top of today’s announcement that American Airlines and Qatar Airways would launch a codeshare agreement, American also announced that it was exploring options for adding flights to Qatar Airways’ hub in Doha. What should passengers expect from this announcement? Launching a long-haul flight is something that requires careful planning. Currently, American is exploring launching flights to Doha’s Hamad Airport. This means that the airline is at the beginning stages of putting together a flight to Doha.

Read More
BUSINESS AVIATION

How to be eco-friendly in the aviation industry?

Article | February 25, 2020

Each year airlines begin new sustainability initiatives, experiment with biofuels, and offset their carbon emissions on selected flights; yet, sustainability should not only be a topic of discussion when an aircraft is in the air but also when it’s on the ground. In just one year, a Boeing 777, 787, Airbus A330, and A350, burn an extra 265,000 litres of fuel due to the 1% increase in drag. As a result, a full year’s operations of such an aircraft costs US$77,600 more than during the previous year. A dirty aircraft exterior is full of microscopic patches of dust and mud that impact the airliner’s operational efficiency by creating turbulent airflow across the whole fuselage. While the problem of additional drag is not new, there are no solutions to combat it other than performing regular cleaning of the aircraft’s exterior. Reducing drag – through cleaning – on aircraft fuselage, wings, engine cowlings, and stabilizer brings another challenge; how to remain sustainable while performing the exterior cleaning process? A popular, yet wasteful pressurized water cleaning technique requires more than 11,300 litres of water to clean one Airbus A380 aircraft and more than 9,500 litres to clean a Boeing 777. Traditionally, aircraft are cleaned four to five times per year, and with more than 48 thousand airframes in the world, the amount of water used each year is immense. As a result, the positives of clean fuselages are outweighed by the negatives of wasteful usage of expensive and environmentally important resources. This raises a question: whether it is possible to be eco-friendly in the aviation industry when one solution brings even more challenges than benefits? While the answer may look complicated, the definite answer is yes. The use of robots in household applications has proven that robotification is an inevitable and much-needed process to achieve even more efficient operational performance. One of the solutions to address the inefficient and time-consuming process of washing an aircraft fuselage is to employ an aircraft exterior cleaning robot. The market offerings like Nordic Dino, have been perfected and adapted to work with a wide range of aircraft fuselage types. Such robots are designed to minimize the use of water and detergent on every wash; saving more than 30% more water when compared to traditional washing methods. At the same time, built with sustainability in mind, the robots can be equipped with electric motors, further minimizing the environmental impact. “Sustainability and eco-friendliness should not be viewed as challenges or impossible achievements in the aviation industry. By utilizing the right equipment, finding alternatives to polluting methods, and increasing efficiency at every step possible, companies could come one step closer to operational efficiency as well as sustainability targets. Our offering, Nordic Dino can reduce the use of water and detergent and can be powered by electricity, reducing carbon and nitrogen dioxide emissions. By the robotification of the cleaning process we present a solution to MROs and dedicated aircraft cleaning companies to become green.” – commented Jan Brunstedt, CEO of Aviator Robotics AB.

Read More

What To Expect From SWISS’ First Airbus A320neo

Article | February 25, 2020

On Thursday the 20th of February, SWISS will welcome its first Airbus A320neo. Here’s what to expect from the Lufthansa subsidiary’s new aircraft. SWISS is preparing for its new Airbus A320neo to enter into service. The first A320neo made its inaugural flight from the Airbus factory in Hamburg earlier this month and will be delivered to the airline’s hub at Zurich airport on Thursday this week.

Read More

The future of aviation will be greener and faster than ever before

Article | February 25, 2020

While flying cars may someday deliver on the Jetsons-like promise of buzzing around cities in robotic air taxis, the future of commercial aviation is no less tantalising. Companies large and small are working on cleaning up the skies with electric airplanes, bringing back supersonic travel, and even flirting with the edge of space to transport passengers across the world.

Read More

Spotlight

Omega Airline

Omega Airline Software is the developer of Ames, a enterprise software suite dedicated to planning and scheduling the maintenance of commercial aircraft.

Events