Aviation Engineering Pathways

| March 15, 2018

article image
Aviation Engineering Pathways Infographic

Spotlight

AHS Aviation

Like the pit stop at Formula 1 safety, reliability and speed are the most important requirements for ground handling. We are your partners on the ground. From passenger check-in to cargo, from handling executives to IATA ticketing, whether a regional airline or a global player – we take care of everything.

OTHER ARTICLES

The Top 5 Head Of State Aircraft In The World

Article | April 1, 2020

Flying first class can be very luxurious. Flying in your own private jet is a whole other level of luxury though. But of these world leaders, their transport is a step up again. Many countries use their own private jets to move leaders around, but which are the best, most luxurious aircraft used by heads of state? Here’s our top five.

Read More

Which Airlines Should Order The Airbus A330-800neo?

Article | February 22, 2020

Last week, we received news that the Airbus A330-800 has finally achieved joint Type Certification from European and American civil aviation regulators. With this milestone achieved, airlines can feel even more confident adding the aircraft to their fleets. However, this smaller variant of the A330neo has only been ordered by a few airlines, in small quantities. Today we’ll look at what other airlines around the world might benefit from the A330-800.

Read More

Eco travel: What are our current options for green aviation

Article | February 28, 2020

When the first commercial flight took off on 1 January 1914, the carbon emissions contributing to air pollution were probably not the highest priority. More than a century later, in 2019, the actions of young environmental activist Greta Thunberg helped raise awareness of the Swedish term flygskam — translated as “flight shame” — to the rest of the world. Her decision to cross the Atlantic Ocean by boat, instead of going by plane, to attend a United Nations summit captured the world’s imagination. In fact, it was Swedish singer Staffan Lindberg, who started the movement in 2017 with his pledge to give up flying.

Read More

How to be eco-friendly in the aviation industry?

Article | May 12, 2021

Each year airlines begin new sustainability initiatives, experiment with biofuels, and offset their carbon emissions on selected flights; yet, sustainability should not only be a topic of discussion when an aircraft is in the air but also when it’s on the ground. In just one year, a Boeing 777, 787, Airbus A330, and A350, burn an extra 265,000 litres of fuel due to the 1% increase in drag. As a result, a full year’s operations of such an aircraft costs US$77,600 more than during the previous year. A dirty aircraft exterior is full of microscopic patches of dust and mud that impact the airliner’s operational efficiency by creating turbulent airflow across the whole fuselage. While the problem of additional drag is not new, there are no solutions to combat it other than performing regular cleaning of the aircraft’s exterior. Reducing drag – through cleaning – on aircraft fuselage, wings, engine cowlings, and stabilizer brings another challenge; how to remain sustainable while performing the exterior cleaning process? A popular, yet wasteful pressurized water cleaning technique requires more than 11,300 litres of water to clean one Airbus A380 aircraft and more than 9,500 litres to clean a Boeing 777. Traditionally, aircraft are cleaned four to five times per year, and with more than 48 thousand airframes in the world, the amount of water used each year is immense. As a result, the positives of clean fuselages are outweighed by the negatives of wasteful usage of expensive and environmentally important resources. This raises a question: whether it is possible to be eco-friendly in the aviation industry when one solution brings even more challenges than benefits? While the answer may look complicated, the definite answer is yes. The use of robots in household applications has proven that robotification is an inevitable and much-needed process to achieve even more efficient operational performance. One of the solutions to address the inefficient and time-consuming process of washing an aircraft fuselage is to employ an aircraft exterior cleaning robot. The market offerings like Nordic Dino, have been perfected and adapted to work with a wide range of aircraft fuselage types. Such robots are designed to minimize the use of water and detergent on every wash; saving more than 30% more water when compared to traditional washing methods. At the same time, built with sustainability in mind, the robots can be equipped with electric motors, further minimizing the environmental impact. “Sustainability and eco-friendliness should not be viewed as challenges or impossible achievements in the aviation industry. By utilizing the right equipment, finding alternatives to polluting methods, and increasing efficiency at every step possible, companies could come one step closer to operational efficiency as well as sustainability targets. Our offering, Nordic Dino can reduce the use of water and detergent and can be powered by electricity, reducing carbon and nitrogen dioxide emissions. By the robotification of the cleaning process we present a solution to MROs and dedicated aircraft cleaning companies to become green.” – commented Jan Brunstedt, CEO of Aviator Robotics AB.

Read More

Spotlight

AHS Aviation

Like the pit stop at Formula 1 safety, reliability and speed are the most important requirements for ground handling. We are your partners on the ground. From passenger check-in to cargo, from handling executives to IATA ticketing, whether a regional airline or a global player – we take care of everything.

Events