Airport Management

Ontario International Airport Authority approves budget revision to lower airline fees

ITC News
he Ontario International Airport Authority Board of Airport Commissioners today approved a budget revision to reduce landing fees and other airline costs to make the Southern California airport even more attractive to passenger and cargo air carriers.

The reduced charges are retroactive to January 1. The new landing fee rate is $1.60 per 1,000 pounds of landed weight, down 8.3 percent from $1.71. The terminal rental rate is reduced 19.5 percent to $80 per square foot per year from $99.38.

The reductions are possible because of faster growth in passenger volume contributing to higher-than-projected revenues from non-airline sources such as parking, rental cars, food and beverage, and news and gift concessions. In addition, airport operating expenses were reduced $2.1 million in the last six months of calendar year 2021.

Ontario's passenger volume has approached near pre-pandemic levels in recent months. In the final six months of calendar year 2021, passenger activity was 94.7% of the same period in 2019.

"With the transfer of Ontario International to local control in 2016, we pledged that our Southern California aviation gateway would strive to offer a cost structure attractive to airlines as they make route planning decisions, Now, as the aviation industry prepares to emerge from the COVID-19 pandemic, it is more important than ever we keep airport costs as low as possible for our airline partners. Air carriers need to know where they can operate most profitably, and we are proud to say that is Ontario International Airport."

- OIAA Commission President Alan D. Wapner.

"We are pleased to share our increased non-airline revenues and lower operating costs with our airline partners through a reduction in landing fees and terminal rental rates for the second half our fiscal year. Moreover, we are committed to doing all possible to continue this trend."

-Deputy Chief Executive Officer Atif Elkadi

About Ontario International Airport
Ontario International Airport (ONT) is the fastest growing airport in the United States, according to Global Traveler, a leading publication for frequent fliers. Located in the Inland Empire, ONT is approximately 35 miles east of downtown Los Angeles in the center of Southern California. It is a full-service airport which, before the coronavirus pandemic, offered nonstop commercial jet service to 26 major airports in the U.S., Mexico, Central America and Taiwan. 

About the Ontario International Airport Authority (OIAA)
The OIAA was formed in August 2012 by a Joint Powers Agreement between the City of Ontario and the County of San Bernardino to provide overall direction for the management, operations, development and marketing of ONT for the benefit of the Southern California economy and the residents of the airport's four-county catchment area. OIAA Commissioners are Ontario Mayor Pro Tem Alan D. Wapner (President), Retired Riverside Mayor Ronald O. Loveridge (Vice President), Ontario City Council Member Jim W. Bowman (Secretary), San Bernardino County Supervisor Curt Hagman (Commissioner) and retired business executive Julia Gouw (Commissioner).

Spotlight

Spotlight

Related News

Aviation Technology

Archer Closes Previously-Announced Financing and Development Agreements to Complete World’s Highest-Volume eVTOL Aircraft Manufacturing Facility

Business Wire | October 12, 2023

Archer Aviation Inc. a leader in electric vertical takeoff and landing (eVTOL) aircraft, today announced that it has closed agreements with Synovus Bank and Evans General Contractors, LLC for the financing and development of its high-volume manufacturing facility in Covington, Georgia. Construction is already underway on the first phase of the Covington facility build out of approximately 350,000 square feet to support production of up to 650 aircraft per year, which would make it the world’s largest eVTOL aircraft manufacturing facility by volume. Archer expects to produce the highest volume of eVTOL aircraft while bearing a dramatically lower manufacturing capital cost than projects announced by competitors in the industry. Today’s announcement secures at least $65 million in financing which represents a substantial majority of the cost of construction for the first phase of Archer’s eVTOL manufacturing facility. In conjunction with previously announced incentives from the state of Georgia and Archer’s partnership with Stellantis, today’s announcement advances the company’s strategy of creating the most capital efficient path to scaled manufacturing. This is also possible due to Archer’s business strategy of partnering with top tier aerospace suppliers, like Honeywell and Safran, for a majority of Midnight’s components, streamlining the manufacturing and assembly process dramatically while allowing for a facility that is set to achieve high volumes of output. Phase one of Archer’s high-volume manufacturing facility is on target to be completed in 2024 ahead of Midnight’s planned entry into service in 2025. Phase two of the facility provides the capability to expand the operation to approximately 900,000 square feet to support long-term production targets of over 2,000 aircraft per year. “The ability to manufacture eVTOL aircraft at scale is critical to building a successful business in this industry and Archer continues to maintain a significant lead on this front. Today, we’re taking another major step forward on our manufacturing buildout by securing a design-build agreement and financing agreement for the world’s first, and largest by volume, eVTOL manufacturing facility,” said Adam Goldstein, Archer’s Founder and CEO. “Consistent with our capital efficient strategy of getting to commercialization, we’ve achieved attractive terms on the project. These agreements, along with our already strong partnership with Stellantis, give us the flexibility to ramp up our capacity and become the leading scale manufacturer of eVTOL aircraft in the world.” Archer has selected Synovus Bank and Evans General Contractors, LLC, respectively, as its financing and development partners. In selecting its partners for the Covington project, Archer considered a range of companies with expertise in high-volume manufacturing facilities in the southeast United States. Goldstein added, “We are committed long-term partners to the community in Covington, Georgia, and we are thrilled to be working with companies who share our vision of having the world’s leading, state-of-the-art eVTOL manufacturing facility right here in the United States.” Archer’s goal is to transform urban travel, replacing 60-90 minute commutes by car, with estimated 10-20 minute electric aircraft flights that are safe, sustainable, low noise and cost competitive with ground transportation. Archer’s Midnight is a piloted, four passenger aircraft designed to perform rapid back-to-back flights with minimal charge time in between flights. Archer’s Midnight aircraft will be manufactured at the company’s high-volume manufacturing facility in Covington, GA before being deployed to different customers and markets in the U.S. and abroad. About Archer Archer is designing and developing electric vertical takeoff and landing aircraft for use in urban air mobility networks. Archer’s mission is to unlock the skies, freeing everyone to reimagine how they move and spend time. Archer's team is based in Santa Clara, CA.

Read More

Business Aviation

Alerion Aviation Expands Fleet, Offering Enhanced Private Jet Charter Services

PR Newswire | October 03, 2023

Alerion Aviation, a leading brand in private aviation management and charter services, is thrilled to announce the addition of several new private jets to its managed aircraft portfolio. With this expansion, Alerion Aviation is now equipped to provide an even greater range of options for private jet charter, ensuring an unparalleled experience for its clients. The newly added aircraft, meticulously selected for their comfort, performance, and safety, include a diverse range of models from Gulfstream GV and G200, Hawker 900, Citation Sovereign and Citation X. Whether for business or leisure, Alerion Aviation's fleet offers a charter solution tailored to each client's requirements. "We are excited to offer our clients an expanded fleet of private jets under our management for charter," said Richard Ziskind, Chief Commercial Officer at Alerion Aviation. "This strategic expansion allows us to continue delivering the highest level of service, flexibility, and luxury in the private aviation industry." Alerion Aviation takes pride in its commitment to safety, ensuring that all aircraft are maintained to the highest industry standards. The company's team of experienced professionals provides a seamless and worry-free travel experience for every client. Whether it is a short domestic flight or a long-haul international journey, Alerion Aviation remains dedicated to delivering unparalleled luxury, convenience, and privacy for its clients. The company's charter services are ideal for business executives, families, and individuals seeking a hassle-free and exclusive travel experience. About Alerion Aviation: Alerion Aviation, with bases in New York, Florida, and California, provides an unmatched level of service, safety, and privacy for private jet charters as well as aircraft management, maintenance, and worldwide aviation consulting. It manages and operates midsize, super-mid, and heavy jets, all available for charter. The company's commitment to safety has garnered prestigious, third-party ratings, including the ARG/US Platinum Elite Rating, Wyvern, and IS-BAO (International Standard for Business Aviation Operations) Stage 3 certification.

Read More

Aviation Technology

Supernal, Hyundai WIA and Mecaer Aviation Group Partner to Accelerate eVTOL Landing Gear Development

PR Newswire | October 19, 2023

Supernal, Hyundai Motor Group's (HMG) Advanced Air Mobility (AAM) company, Hyundai WIA, a global automotive and aerospace parts manufacturer and Mecaer Aviation Group, an Italy-based global aeronautical company, announced today a partnership to design and manufacture landing gear systems for electric vertical takeoff and landing (eVTOL) vehicles. Hyundai WIA specializes in mass manufacturing and precision machine tools, while Mecaer is experienced in designing and building aerospace-grade landing gear systems. The three partners are collaborating to improve the safety and overall performance of eVTOL vehicles by addressing weight, structural efficiency, energy absorption and electronic system integration in the landing gear design and manufacturing process. "Our collaboration with Hyundai WIA and Mecaer is a testament to Supernal's commitment to innovation and the highest standards of safety, design and manufacturing for Advanced Air Mobility," said Jaiwon Shin, president of Hyundai Motor Group and CEO of Supernal. "This partnership unites our collective strengths and expertise to deliver aerospace-grade eVTOL landing gear in record time and ensure their scalability and sustainability. These types of automotive and aerospace strategic alliances are key to the growth and success of our emerging industry." The partnership is critical to Supernal's efforts to pioneer high-scale production processes that will meet future demands of the AAM industry. The collaboration will support the business model—and streamline manufacturing—by incorporating state-of-the-art materials and efficient assembly technologies. "Hyundai WIA looks forward to leveraging our expertise from the automotive industry in large-scale parts manufacturing for the benefit of Supernal's upcoming eVTOL aircraft," said Jae-Wook Jung, president and CEO of Hyundai WIA. "We foresee significant potential to help demonstrate how cross-industry efficiencies can address enduring supply chain challenges, as well as the potential created by a new category of civil aviation." "We are especially proud to announce our participation in this industry-leading strategic partnership and to have teamed with Supernal and Hyundai WIA to design, develop and manufacture a fully integrated wheeled landing gear for the Advanced Air Mobility company's eVTOL vehicle," said Bruno Spagnolini, CEO, Mecaer. "We are extremely appreciative of the trust Supernal has shown in the ability of the Mecaer and Hyundai WIA team to produce and innovate its landing gear system." Supernal, Hyundai WIA and Mecaer held a signing ceremony for the partnership at the Seoul Air Show on October 18.

Read More